This Generic Dexter Stack Trunnion is also known as a Tumbler Support or Spider. It replaces old Dexter Part #s 9568-009-005, 9568-009-003. It Fits Dexter Stack Dryer Models DL2X30 & DDAD30.
If you own Dexter Commercial Laundry Equipment, below are some tips for preventative maintenance to keep your machines running like new:
Make sure all machine power is disconnected before making checks inside the machine.
DAILY
1. Check that the door remains securely locked during the entire cycle.
2. Clean the cabinet top around soap dispenser.
3. Clean the soap dispenser and soap lid and check that all dispenser mounting screws
are in place and tight.
4. Check the drain for leaking and proper draining.
5. Check the water connections for leaks.
6. Check door seal for foreign material.
7. Leave the loading door open to aerate the washer when not in use.
QUARTERLY
1. Check the drive belt for wear and proper tension.
2. Clean lint and other foreign material from around drive motor.
3. Remove water inlet hose filter screens and clean or replace as necessary .
4. Check all electrical components for moisture and wipe away any foreign debris.
ANNUALLY
1. Clean and remove lint and foreign debris from outside cover of VFD with a dry clean
rag or dry brush.
2. Inspect all wire connections especially at relays, terminal connections and circuit
boards for tightness.
3. Inspect and check tightness of mounting bolts that mount washer frames to floor.
After any service, be sure to reinstall all panels and safety screens before reconnecting power.
SHOP MORE DEXTER REPLACEMENT PARTS HERE!
No comments:
Post a Comment